The 12″ folding tool is ideal for HVAC applications such as 3/8″ folds for drive cleats and one inch deep folds for joist panning, plenums, register boots, trunk line end caps, and more. Handy sight holes ensure proper depth alignment. 12 ” (31 cm) Folding Tool with 3/8″ (9.5 mm) & 1/2″ (12.7 mm) depths. 12 inch folding tool, creates 3/8″ and 1″ fold depths in ductwork. Folding seams are formed from two steel halves, permanently joined together. Handy sight holes ensure proper depth alignment. 1 in. (25.4 mm) deep folds for joist panning, plenums, register boots, trunk line end caps and more. 3/8 in. (9.5 mm) folds for drive cleats.
13 reviews for Malco 12 Inch Premium Sheet Metal Folding Tool, 3/8″ and 1″ Folding Depths, Made in USA, HVAC and Metal Roofing Tools (12F)
0.0out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
Amazonion –
High quality tool
Way way better than the Weiss folding tool I had before which had soft corners that would clam up after every fall. I have dropped the Malco just as many times as my old Weiss and it is still as straight as it was on day 1. The Malco always gives me perfect edges. It is worth the few dollars extra in price.
Helpful(0)Unhelpful(0)You have already voted this
BruceFromFL –
Heavy duty
Heavy duty and functionality should hold its shape over time even with plier use.The size is manageable but not for long runs. Only 12″.Price is a tad high but easy to use.
Helpful(0)Unhelpful(0)You have already voted this
John –
perfect bends
worked well. easy to use and makes perfect bends. well made and strong
Helpful(0)Unhelpful(0)You have already voted this
Oscar Gonzalez Montenegro –
Great for sheet metal fabrication.
I’m in the pest control industry and I do rodent and wildlife exclusions. This helps with bending or manipulating the sheet metal to fit tight spaces. I typically use a breaker and other folding tools but this gives you that little extra flexibility that you need.
Helpful(0)Unhelpful(0)You have already voted this
C. Clark –
Very durable and should last a while
This folding tool is extremely durable and should last a long time. It produces nice straight bends and is what I needed. It’s nice to have the option to bend 3/8″ or 1″ in one tool. I see using this tool more on diy projects around the house. I recommend this tool to those needing to bend thin metal.
Helpful(0)Unhelpful(0)You have already voted this
Amazon Customer –
Good buy
Great tool, price
Helpful(0)Unhelpful(0)You have already voted this
Michael S –
Works well
Works well, only downside is mine came a little bent, but I was able to straighten it out
Helpful(0)Unhelpful(0)You have already voted this
Howie BM –
Great product
Does not to bend 16 gauge but fits snug
Helpful(0)Unhelpful(0)You have already voted this
John G. –
Very heavy for its size. It should out live me. 👍🏼
Helpful(0)Unhelpful(0)You have already voted this
Asbjorn Olsen –
It bends metal, pretty simple
Helpful(0)Unhelpful(0)You have already voted this
Tung Wei Hong –
Is A good buy. Will Buy again if require more
Helpful(0)Unhelpful(0)You have already voted this
idan –
The wiss one snapped in half on me doing some duct. The Malco however is my tried and true
Amazonion –
High quality tool
Way way better than the Weiss folding tool I had before which had soft corners that would clam up after every fall. I have dropped the Malco just as many times as my old Weiss and it is still as straight as it was on day 1. The Malco always gives me perfect edges. It is worth the few dollars extra in price.
BruceFromFL –
Heavy duty
Heavy duty and functionality should hold its shape over time even with plier use.The size is manageable but not for long runs. Only 12″.Price is a tad high but easy to use.
John –
perfect bends
worked well. easy to use and makes perfect bends. well made and strong
Oscar Gonzalez Montenegro –
Great for sheet metal fabrication.
I’m in the pest control industry and I do rodent and wildlife exclusions. This helps with bending or manipulating the sheet metal to fit tight spaces. I typically use a breaker and other folding tools but this gives you that little extra flexibility that you need.
C. Clark –
Very durable and should last a while
This folding tool is extremely durable and should last a long time. It produces nice straight bends and is what I needed. It’s nice to have the option to bend 3/8″ or 1″ in one tool. I see using this tool more on diy projects around the house. I recommend this tool to those needing to bend thin metal.
Amazon Customer –
Good buy
Great tool, price
Michael S –
Works well
Works well, only downside is mine came a little bent, but I was able to straighten it out
Howie BM –
Great product
Does not to bend 16 gauge but fits snug
John G. –
Very heavy for its size. It should out live me. 👍🏼
Asbjorn Olsen –
It bends metal, pretty simple
Tung Wei Hong –
Is A good buy. Will Buy again if require more
idan –
The wiss one snapped in half on me doing some duct. The Malco however is my tried and true
James –
Beauty move Malco beauty move