G.E.T. P-3064-1-CL 64 oz. Clear Plastic Pitcher with lid, Dishwasher Safe, Break Resistant, for Indoor and Outdoor Entertaining, (Pack of 12)
$10.49
Related Products
Finally, a 2-quart plastic pitcher that is designed to last. This commercial-grade pitcher is designed to withstand daily use in restaurants, cafes, hotels and busy home kitchens. The clear pitcher features extra thick walls that won’t bend or flex like cheaper residential-grade pitchers making it your go to water pitcher, juice pitcher or iced tea pitcher. The durable plastic material won’t crack, chip or break if dropped ideal for serving drinks indoors or outdoors. The subtle texture is highly resistant to scratches and fingerprints making this juice pitcher stand the test of time. The tight-fitting lid ensures beverages stay free from environmental contaminates. The specially designed angled pour spout prevents dribbling or splashing for mess-free beverage service. The reinforced handle design ensures a steady grip when pouring from this half-gallon pitcher. Cleanup is a breeze with this 64-ounce pitcher. The smooth interior is specially designed to resist staining making this pitcher perfect for iced tea or other colored beverages that are prone to staining. Both pitcher and lid are rated for use in residential and commercial dishwashers. 100% BPA free and recyclable. Pitcher is 8.5” tall with a maximum diameter of 7.5”.
Dishwasher safe
Break resistant
Shatter resistant
Country of origin: China
13 reviews for G.E.T. P-3064-1-CL 64 oz. Clear Plastic Pitcher with lid, Dishwasher Safe, Break Resistant, for Indoor and Outdoor Entertaining, (Pack of 12)
Add a review
$10.49
OneSauce –
NOT A REPLACEMENT PITCHER for Mr coffee tea maker
DOES NOT FIT a Mr Coffee Ice Tea maker, NOT a replacement pitcher.I didn’t return it. It’s a nice pitcher. You can make lemonade and punch in it. I’ve only used room temperature water in it, which holds liquid well. I’ve never tried adding boiling water to it, since it didn’t work for what I needed it for. So I don’t know if it holds hot coffee or hot tea.Cleaning it is easy. And if it develops a colored film to it. Add a tablespoon of arm and hammer powder detergent with half a cup of white distilled vinegar, and tablespoon of dish soap. Fill it to the top with hot tap water and let it sit for 40min. Take a scrubber and the film will wash right off.
Amazon Customer –
Sweet Tea Pitcher with Lid, perfect size for a standard ‘fridge!
A nice mid-weight plastic pitcher with lid that we’re using for sweet tea. The lid is especially helpful in keeping beverages from leaking over if the pitcher is bumped. The 2 quart size is useful. . . neither too large nor too small. It is simple to tuck into the dishwasher to ensure that it’s clean with each new brew. This pitcher looks durable and doesn’t appear to be chip-prone. I think this will do nicely for its chosen purpose.
Peter –
Good container, feels sturdy
Lid is difficult to turn to open the spout, I generally just take the lid off. Container is solid and a good size.
S. Sykes –
well made but too small
well made but too small for our family.
Chris Bushman –
Nice
This actually a really good pitcher. It’s surprisingly heavy duty, really restaurant quality. Lid has two pouring options, wide open and ice cube hold back. Has a good feel to it and pour is clean and dripless. Lid fits snugly. I bought one of these, liked it a lot, then bought another one. A keeper. Yes, this has a capacity of 64 ounces but that is to the very brim which you don’t want to do. Practical capacity is about 12 ounce less than that.
L –
Could Be Better
I bought the “64” oz size, from here on referred to as 64 oz. The accuracy of the measurement is not a major concern for me and I have not measured it. I was planning to add its larger size but will no longer buy this brand due to the following reasons:1. Opening the lid: I bought two different unrelated pitchers from two different sellers and there are lid handle flaws with both, making it difficult, to near-impossible, to open either one. I will refer to that unrelated pitcher as Yellow. Pitcher 64 oz is the better of the two on the ‘lid opening’ category.When you have to fidget to get a lid off a water pitcher, that is not ideal. When you have to outright struggle or feel you need a tool, that is a fail. We fidgeted with pitcher 64 oz more than necessary but it wasn’t as bad as with Yellow, which requires a total redesign of its lid handle by the manufacturer, imho.That said, 64 oz fails or is subpar in the leaking and pitcher-handle categories where Yellow aces! Here is why:2. 64 oz: You can still literally POUR water out, although at a slower rate, even when the lid is in a closed-off position with the openings away from the spout. Yes, pour. Not drip, trickle or leak but a steady stream of pour from the spout when it should be closed.No such problem with Yellow.This is because the lower rim of the 64 oz lid isn’t long enough to seal the spout; it sits on or slightly above the spout, so leaves the small gap which is enough to cause liquid content to literally flow when the pitcher is tipped downward. This can also allow small insects or debris of some sort to get in. Correction: Extend the length of the rim a few millimeters downward in future productions.3. The pitcher handle of 64oz while aesthetically nice, is too slender, smooth and slippery, so can potentially slip and tip when fully filled (I had a similar problem with a heavy stoneware mug with a slippery, less ergonomic handle that almost always spilled hot tea/coffee when full). I had to wrap elastic self-adhesive bandage around the mug to solve the problem and have added some to 64oz’s handle, which helps to stabilize it when filled. Correction: The girth of 64oz’s handle can be widened to prevent unexpected breakage and some texture added for stability when gripped. Adding texture to the lid handle should help with easier gripping and opening as well.The pitcher is otherwise quite nice.
LB12 –
Makes it easier to fill water bottles &coffee maker
Fits well in my KitchenAid refrigerator water auto fill area. This is a big help for filling up water bottles that don’t fit in the refrigerator water fill area. We fill the pitcher with water (or ice) and then pour the water (or ice) into the water bottles, coffee maker, and other items. The large, deep pour spout keeps water flowing in the right direction. The pitcher even comes with a lid. The handle is a nice size and has a sturdy feel to it (attached to the pitcher at both top and bottom) This pitcher was a perfect solution to transfer water from refrigerator to larger vessels. Good quality so far.
Star Gray –
Simple and great
Durable enough to go through the dishwasher so it’s easy to clean. I haven’t had any issues with leaking or functionality. I consider it a great value for the money
Serafin O. –
cuando necesitas que tu liquido no toque metal es la mejor opcion
Maverick –
Excellent produit. de très bonne qualité
Javier –
El material se siente de buena calidad y llegó muy rápido…
Lynne –
Belle article, je le recommande
Maru –
Tiene un tamaño compacto que cabe bien en el refri y se ve resistente.